A ball valve can look fairly simple from outside, with a body, an operating stem and a connection at each end. Inside, however, several parts need to remain in a fixed relation...
A change in operating torque can be an early sign that something within a pipeline valve or its operating arrangement has changed. Normal opening and closing should follow a re...
A Buried Ball Valve operates in an environment where direct access becomes difficult after installation. Soil can remain in contact with the outer surface for long periods, whi...
A valve installed below ground faces conditions that differ from equipment placed in an open workshop or indoor plant area. Soil can hold moisture around a metal surface, while...
Pipeline systems really do rely on valves to control the movement of liquids or gases, both during regular operation and whenever maintenance comes around. Installation environ...
A ball valve buried underground faces conditions that above-ground valves never encounter. Soil holds moisture against the valve body. Groundwater rises and falls with the seas...
Inside the body of a floating ball valve lies a space that does not exist in many other valve types. When the valve closes, the ball presses against the downstream seat, creati...
Leakage often creates an immediate concern because fluid appears outside the expected flow path or passes through a closed valve. Even so, visible leakage does not always mean ...
A valve in service rarely stays at one temperature. The process warms up and cools down. The ambient temperature changes with the seasons. Steam tracing turns on and off. Each ...
Pipeline systems rely on valves to control the movement of different fluids during daily operation. A valve is not only responsible for opening and closing flow passages; its s...
Double block and bleed describes a valve setup where two separate sealing barriers exist between the process fluid and the outside environment, with a way to relieve pressure f...
Pipeline systems depend on valves to keep fluid movement under control. A valve may seem like a simple part, yet sealing quality affects process stability, equipment protection...